RANGE ROVER SPORT - 2005-9 TVD6 PERFORMANCE DISC AND PAD FIT - FRONT
DISCOVERY 3 - 2.7 TDV6 2005-9 - PERFORMANCE DISC AND PAD FIT - FRONT
RANGE ROVER SPORT DRILLED AND GROOVED PERFORMANCE BRAKE DISCS AND PAD SET FRONT WITH WEAR SENSOR WIRE'S.
FITS RANGE ROVER SPORT 2.7 TDV6 MODELS FROM 2004-2009 WITHOUT BREMBO FRONT BRAKE CALIPERS FITTED.
LR PART NUMBERS LR019618 SDB000604 SEM000024
PERFORMANCE DISCS
Our performance brake discs offer increased bite from cold and excellent fade resistance in most 4 wheel drive braking applications. Whether its a steep rocky descent, ploughing through mud and water or just daily driving these brake discs will give excellent stopping performance in all conditions. Grooves are machined into the brake disc to force away the dust and gasses that build up between the pad and disc, keeping the brakes cooler and reducing fade. The cross drillings contribute to cooling and heat dissipation and also allow the gasses to escape. Of course they fill with mud when off road, clean them out afterwards when washing the vehicle to maintain performance and pad life. With the angled grooves it is found that they self clean in most cases. Quality machining to high tolerances using the correct materials ensure these brake discs will withstand any test. With overweight four-wheel drive vehicles with oversize tyres its important to find a set of brake pads that really do perform. A heavily laden expedition vehicle will quickly overheat brakes, very large tyres fitted to off road vehicles also require extra brake pedal pressure to stop them turning. To get the best from our Cross Drilled and Grooved (CDG) brake discs we recommend the use of high quality brake pads. These pads give good bite from cold, work well off road especially in low range with high torque engines and transmissions driving against the brakes. They have high wear resistance, low noise and above all when combined with our CDG brake discs give a much improved braking performance.
A set of EBC Ultimax HD brake pads.
These pads are an excellent upgrade from OEM brake pads and offer better all round braking performance.
New AF42/66 friction material which completely eliminates brake judder and produces a high friction long lasting brake pad.
> Unique powder coat finish to both pad and back plate gives lifetime resistance to corrosion and prevents moisture ingress.
> Unique 'Brake-In' surface coating provides instant brake efficiency on installation and conditions the brake rotor removing glaze, black spotting etc from disc surface.
> All pads feature centre line slot which prevents heat expansion cracks and reduces brake noise.
> All pads feature edge chamfers which have major technical benefits;
- Significant reduction in brake noise
- Prevents edge lifting under left and right extremities of pad which can cause corrosion ingress and eventual pad de-bond
- Can extend pad life by virtue of improved pad efficiency
> Includes factory fitted noise reduction shims.
plus BRAKE WEAR SENSOR
